GMC RGB LED Side Marker Kit Installation GuideUpdated a day ago

This guide covers the basic installation steps for the AutoJeweler GMC RGB LED side marker kit.

Tool Needed

• T20 Torx bit

1. Remove the Fender-Liner Screws

Remove all screws from the fender liners.

2. Remove the Side Marker Light

Use a T20 Torx bit to remove the side marker light from the fender.

3. Disconnect the Factory Lamp

Remove the halogen lamp plug from the lamp socket.

4. Connect the LED Plug

Connect the LED plug to the OEM socket.

5. Reinstall the Socket

Reinstall the socket and repeat the same steps on the other side marker light.

6. Test the LED Side Marker Lights

Test the LED side marker lights before completing reassembly.

Need help? Contact AutoJeweler Support with your order number, vehicle information, and clear photos of the installation area.